High Temperature Sinter (Cable Machine)
|FOB Price:||US $40,000 / set|
|Min. Order:||1 set|
|Min. Order||FOB Price|
|1 set||US $40,000/ set|
|Transport Package:||Wood Package|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal|
- Model NO.: F4
- Certification: BV
- Heating System: Electric
- Mould Life: Approximately 10years
- Condition: New
- Warranty: 12 Months
- Inverter: Siemens
- Bobbin Size: 180-500 Bobbin
- Factory Location: Between Jiangsu and Zhejiang Prov.
- Specification: CE
- HS Code: 8477900000
- Precision: High Precision
- Demoulding: Automatic
- Function: High Temperature Resistance
- Automatic Grade: Automatic
- Customized: Customized
- Motor: Siemens
- Main Eletrical Elements: Siemens, NSK, NACHI, Omron, Schneider etc.
- Color: by Customer Requirements
- Trademark: DH
- Origin: Jiangsu, China
Single head dynamic pay-off rack→ dancing wheel→ single head sinter → constant temperature trough→ single head hauling machine
This production line depends on manufacture situation to upgrade the configuration. Optical choose diameter measuring device, spark testing.
Main technical parameter:
Application for sintering polyimide multiple wrapping insulate aviation conductor.
Applicable wire diameter is Φ0.25-Φ6.0mm.
Wire production speed is 1.5-60m/min.
Paying-off motor: 0.75kw converter.
Hauling machine motor: 0.75kw converter.
Temperature measuring point (total in 8 point): 7 points on the main frame, 1 point on the water seal tank. (depending on the height of sinter)
Operating direction: From left to right on the right hand.
Temperature control: Japan RKC temperature-controlled meter.
Taking-up and paying-off reel: OD≤Φ500mm, OW≤300mm, inner bore Φ24-Φ56mm.
Taking-up type: Magnetic powder display tension.
Technical specification of each part:
1. A set of single head motorized pay-off rack.
A) 1HP TW reduction motor, INOVANCE converter pay-off linkaged.
B) Manual operating type screw rod lifting reel, applicable for Φ180 toΦ500 reel operate despooling. (Demander has to provide bobbin diagram)
C) Piston type manual shaftless sliding tip cone, manual loading and unloading the reel.
D) Applicable forΦ0.25-Φ6.0 taping insulated wire paying-off.
E) Paying-off speed is5-75m/min.
F) Tension accumulating induction rack, all guide wheels are cast aluminium, abrasion resistance ceramics spray on the surface.
G) Adjust the weight of tension dancer rocker arm and locate adjustable on the conductor's tension. Tension change can occur the dance rocker arm twirl to outcoming signal control the motor rotate of mortorized pay-off rack.
H) Precision angle to detecting the induction, feedback and linkaged with paying-off motor.
I) The frame of machine is made by steel plate and rectangular steel welding, stoutness and durable;
J) Reel support frame and machine frame mobile connected is convenience for loading and unloading.
2. A set of single head sinter
A) Vertical structure, anchor bolt installed during installation and fixed the upper end.
B) Use 7 parts temperature control, each part length of temperature control is 0.65m, total height is 5.73m. (the height may set according by the workshop site)
C) The height of sinter can be designed by customers reality site, but it will impact the speed of sinter (may be higher or lower)
D) Cast iron heating coil, install two sets heating coil of each temperature control part. Heating coil voltage is 220V, each heating coil power is 1.5KW, and total power is approximately 21KW.
E) The outer cover of heating coil is asbestos layer, ceramic layer, asbestos layer, air layer and stainless steel cover, it is conducive to the thermal insulation separate oxygen.
F) The thickness of centre thread wire is 5mm, centre bore diameter isΦ26mm, error less than±3mm after installed.
G) Precision temperature -controlled meter (JP), power saving set, accuracy temperature control, the maximum temperature control is 500ºC.
H) Temperature control thermocouple adopts from TW. The power wire surround by heating coil are using PTFE high temperature wire connected.
I) Reserved mounting hole at the top of machine for high effective sintering length. (After heighten at the second time, center thread wire tube can be butt joint with annular tubes, however it is will not have effectively separate oxygen performance. It may occur to oxidation during sintering the copper. That is the reason of heighten the length cannot guarantee produce copper core wire. Even if it is not heat the part of heightening cannot ensure to producing copper core wire as well. )
3. A set of water seal tank
A) It is under the sinter, electronic lifting available.
B) Electric heating to control the water temperature, the maximum temperature is 100ºC.
C) No cooling system.
4. A set of hauling take-up machine
A) Hauling taking-up integrated design.
B) Shaft type taking-up axis, tip cone locking, manual loading and unloading the wire coil.
C) 1HP reduction motor (TW), INOVANCE converter linkaged takeing-up.
D) The maximum taking-up speed is 75m/min.
E) Aluminum hauling wheel, skid resistance of surface and woolen felt for water absorption. The diameter of wheel is Φ400mm.
F) 1.2kg. M magnetic powder tensioner of taking-up (TW), digital display taking-up tension for convenience.
G) Φ20mm rolling ring traverse made in China. Array pitch array width are adjustable.
H) Suitable for Φ180-Φ500 bobbin.
Two copies of electrical appliance drawing and one brochure of operation instruction
Common tools and a suit of tool case.